Camera (Optional); Removing The Camera; Replacing The Camera - Dell Studio 1435 Service Manual

Back to Contents Page
Camera (Optional)
Dell Studio™ 1435 Service Manual
Removing the Camera
Replacing the Camera
CAUTION: Before working inside your computer, follow the safety instructions that shipped with your computer.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
Removing the Camera
1. Follow the instructions in Before You
2. Follow the instructions in Removing the Display
3. Remove the display bezel (see
4. Remove the two screws securing the camera board.
5. Release the securing tabs and disconnect the camera cable from the camera board connector.
6. Remove the camera board.
1 screw (2) 2 camera
Replacing the Camera
1. Align the camera board over the screw holes.
2. Replace the two screws that secure the camera board to the display cover.
3. Connect the camera cable to the connector on the camera board.
4. Replace the display bezel (see
5. Follow the instructions in Replacing the Display
Back to Contents Page
Begin.
Assembly.
Display Bezel).
3 camera cable pull-tab
Replacing the Display Bezel).
Assembly.