Intel MI935 User Manual page 55

DRIVERS INSTALLATION
Follow the steps below to install the Marvell Gigabit LAN drivers.
1. Insert the DVD that comes with the board. Click LAN Card and then
Marvell LAN Controller Driver.
2. Click Next when the InstallShield Wizard welcome screen appears.
3. Click Next to agree with the license agreement.
4. Click Install when the Ready to Install the Program screen appears to
proceed with the drives installation process.
5. When the Installation is complete, click Finish for the changes to take
effect.
6. To use the wake up function by Marvell Gigabit LAN, go to the
Device Manager under Windows and select Network adapters. The
following window will appear (Generic Marvell Yukon Chipset based
Ethernet Controller Properties). Click Advanced and select Wake From
Shutdown. In the Value field on the right, select On.
7. Then, also in the Advanced section, click on Wake Up Capabilities. In
the Value field on the right, select Magic Packet, then click OK.
8. Turn off computer.
MI935 User's Manual 51