Intel MI935 User Manual page 29

To set the date, highlight the "Date" field and use the PageUp/
PageDown or +/- keys to set the current time.
Time
The time format is:
To set the time, highlight the "Time" field and use the <PgUp>/ <PgDn>
or +/- keys to set the current time.
IDE Channel Master/Slave
The onboard Serial ATA connectors provide Primary and Secondary
channels for connecting up to four Serial ATA hard disks . Each channel
can support up to two hard disks; the first is the "Master" and the second
is the "Slave".
Press <Enter> to configure the hard disk. The selections include Auto,
Manual, and None. Select 'Manual' to define the drive information
manually. You will be asked to enter the following items.
Capacity :
Cylinder :
Head :
Precomp :
Landing Zone : Landing zone
Sector :
The Access Mode selections are as follows:
CHS (HD < 528MB)
LBA (HD > 528MB and supports Logical Block Addressing)
Large (for MS-DOS only)
Auto
Hour : 00 to 23
Minute : 00 to 59
Second : 00 to 59
Capacity/size of the hard disk drive
Number of cylinders
Number of read/write heads
Write precompensation
Number of sectors
MI935 User's Manual
BIOS SETUP
25