Power/Display Adjustments - Garmin StreetPilot 2610 Operating Instructions Manual

Turning the StreetPilot 2610/2650 On and Off
Toggle the power switch on the right side DOWN to turn the unit On and UP to turn Off. The Wel-
come screen appears briefl y, followed by the Card Information/MapSource copyright page, Press IN on the
THUMB STICK or TOUCH 'OK' to acknowledge, or wait briefl y until the Safe Driving Warning Message
appears. Once again, press IN on the THUMB STICK or TOUCH 'OK' or wait until the Map Page appears.
Adjusting the Backlight, Contrast, and Speaker Volume
The StreetPilot 2610/2650 display and keys can be illuminated for operation at night or in bright sun-
light. Backlight intensity and screen contrast are adjustable. When operating the StreetPilot 2610/2650 at
extreme temperatures, you may fi nd that minor adjustments are needed to obtain the clearest screen.
To adjust screen backlighting and contrast:
1. Press the remote or unit MENU key. Select 'Display' (see pages 4-5).
2. Adjust the backlight and the contrast to the desired level (see pages 4-5). To have the unit automatically
adjust the brightness, place a check in the 'Automatic Brightness' box. For optimum Automatic Brightness
results, set the brightness to a middle level. If Automatic Brightness is checked, the lower the brightness
slide level is set to, the sooner the unit reaches a minimum brightness level. The unit automatically adjusts
the level depending on ambient light conditions.
To adjust the external speaker volume:
1. Press and hold the SPEAK/VOLUME key. A slider adjustment window appears.
2. Adjust the speaker volume (see pages 4-5). The loudest setting is ten, the softest is one. (Alternatively,
volume can be cycled between three settings by repeatedly pressing SPEAK/VOLUME button from this
screen.) Each press activates the audio number.
To calibrate the touch screen:
1. Press the remote or unit MENU key. Select 'Display' (see pages 4-5).
2. Press the remote or unit MENU key again to begin calibration. Follow the on-screen instructions.
Introduction

Power/Display Adjustments

Brightness Contrast
Slider. Slider.
Speaker Volume
Slider.
3