Stopped Time
The length of time that the vehicle has been stopped (stationary) during the time the
–
StreetPilot has been tracking your location since the Trip Computer was last reset.
Total Time
The total length of time that the StreetPilot 2610/2650 has been tracking your location since
–
the Trip Computer was last reset. This is always equal to Driving Time plus Stopped Time.
To reset the Trip Computer or the Maximum Speed:
1. Press the unit or remote MENU key to display the Options window. You may also select the round but-
tons to the right of the main odometer or Max Speed. (Skip to step 4 if using the buttons.)
2. Select 'Reset Trip Computer'.
3. To reset the Maximum Speed only, select 'Reset Max Speed Only'.
4. Select 'Yes' or 'No'.
To select a Mileage Log:
1. Select the 'Job 1' fi eld.
2. Select the desired Mileage Log name.
To rename a Mileage Log:
1. With the desired Mileage Log displayed, press the unit or remote MENU key to display the Options
window.
2. Select 'Rename Log' .
3. Enter the new name (see pages 4-5) and select 'OK' when done.
To reset a Mileage Log:
1. With the desired Mileage Log displayed, press the unit or remote MENU key to display the Options
window. You may also select the round button to the right of the Mileage log. (Skip to step 3 if using the
button.)
2. Select 'Reset Log'.
3. Select 'Yes' or 'No'.
Reference
Trip Information Page
You can reset Max Speed or the Trip Computer from
the Trip Information menu.
Renaming a Mileage Log
19