Detergent Load; Electronically-Controlled Variable Load – Kg Detector/Mode - Candy CTD 10662-07 Instruction And Installation Manual

Maximum
pre-wash and main wash
washing powder
recommended
The detergent dispenser is divided into 4 compartments:
.- Compartment I is for the pre-wash detergent.
.- Compartment II is for the main wash detergent.
.- The compartment
.- The compartment
blueing, etc.
The detergent dispenser has two reference marks:
.- Recommended (lower reference mark). This indicates the recommended level for the pre-wash and
main wash compartments.
.- Max. This indicates the maximum level, which should never be exceeded.
Important:
- We recommend not using bleach for programs with a prewash cycle.
- Do not use liquid detergent for programs with a prewash cycle and/or timed start.
Electronically-controlled Variable Load – Kg detector/mode
This is the last frontier for electronics when applied to washing technology.
Kg detector/mode consists in gauging a series of information throughout the washing phase related to the
amount of clothing placed in the drum.
In this way in the first 4 minutes of the washing, the Kg detector/mode:
- regulates the quantity of water and power consumption.
- sets the wash time.
- regulates rinse rate efficiency.
The washing machine also:
- detects suds and increases the amount of rinse water if necessary.
- adjusts spin speed according to load distribution, thus forestalling in this manner, any imbalance in
the mechanism.

Detergent load

I
is for bleach.
is for fabric conditioners, scenting agents and special additives such as starch,
II
Maximum
Main wash
washing liquid
Maximum
bleach and scenting agent
8