Setting Tracklog
As you are moving and the GPS Companion is computing position fixes, the NAV Companion can
display a visual representation of where you have been (also referred to as Track or Tracklog). While
viewing the Plot Screen the NAV Companion allows you to:
A.
Start Tracklog:
B.
Stop Tracklog:
until you start the tracklog again.
C.
Clear Tracklog:
To Start the Tracklog
1. Tap on the menu icon on your Palm organizer.
2. Tap on "Plot" in the menu bar.
3. Tap on "Start Tracklog". (This is not displayed if a Tracklog is already in progress.)
To Stop the Tracklog
1. Tap on the menu icon on your Palm organizer.
2. Tap on "Plot" in the menu bar.
3. Tap on "Stop Tracklog". (This is not displayed if there is no Tracklog being recorded.)
To Clear the Tracklog
1. Tap on the menu icon on your Palm organizer.
2. Tap on "Tracklog" in the menu bar.
3. Tap on "Clear Tracklog...".
This begins the process of recording your track.
This stops any further movement from being recorded to your track
This erases the tracklog from your plotter display.