Table of Contents
Advertisement
CPU/DIMM/PCI Clock
CPU Clock ratio
These items appear if you have set the CPU Internal Core Speed to Manual.
Use the CPU/DIMM/PCI Clock to set the system bus frequency for the installed
processor (usually 133 MHz,100 MHz or 66 MHz). Then use CPU Clock Ratio to
set a multiple. The multiple times the system bus must equal the core speed of
the installed processor e.g. 3.5 (multiple) x 100 MHz (system bus) = 350 MHz
(installed processor clock speed).
Load Fail-Safe Defaults Option
This option opens a dialog box that lets you install fail-safe defaults for
all appropriate items in the whole setup utility. Press the Y key and then
Enter to install the defaults. Press the N key and then Enter to not
install the defaults. The fail-safe defaults place no great demands on the
system and are generally stable. If your system is not functioning
correctly, try installing the fail-safe defaults as a first step in getting your
system working properly again. If you only want to install a fail-safe
defaults for a specific option, select and display that option, and then
press the F6 key.
Load Optimized Defaults Option
This option opens dialog box that lets you install optimized defaults for
all appropriate items in the whole setup utility. Press the Y key and then
Enter to install the defaults. Press the N key and then Enter to not
install the defaults. The optimized defaults place demands on the
system that may be greater than the performance level of the
components, such as the CPU and the memory. You can cause fatal
errors or instability if you install the optimized defaults when your
hardware does not support them. If you only want to install setup
defaults for a specific option, select and display that option, and then
press the F7 key.
Set Supervisor and User Passwords
These items can be used to install a password. A Supervisor password
takes precedence over a User password, and the Supervisor can limit
the activities of a User.To install a password, follow these steps:
1. Highlight the item Set Supervisor/User password on the main menu
and press Enter.
2. The password dialog box appears.If you are installing a new
password, carefully type in the password. You cannot use more than
37
Advertisement
Table of Contents
Troubleshooting
