Advanced Bios Features Setup Option - IBM PC 300 2169 User Manual

Video
This item defines the video mode of the system. This System Board has a built-
in VGA graphics system so you must leave this item at the default value.
Halt On
This item defines the operation of the system POST (Power On Self Test)
routine. You can use this item to select which kind of errors in the POST are
sufficient to halt the system.
Base Memory, Extended Memory, Total Memory
These items are automatically detected by the system at start up time.

Advanced BIOS Features Setup Option

This option displays a table of items which defines more advanced information
about your system. You can make modifications to most of these items without
introducing fatal errors to your system. Note that the page has a scroll-bar to
scroll down to more items.
Anti-Virus Protection
Machine Type
System Board ID
System BIOS version
CPU Internal Cache
External Cache
CPU L2 Cache ECC checking
Processor Number Feature
Quick Power On Self Test
First Boot Device
Seconf Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Device
Boot Up Floppy Seek
Boot Up NumLock Status
GateAZ0 Option
PrimWare Write Protection
Typematic Rate Setting
*Typematic Dealy(Chars/Sec)
Anti-Virus Protection
When this item is enabled it provides some protection against viruses which try
to write to the boot sector and partition table of your hard disk drive. This item
is Disabled as a default. You need to disable it so that you can install an
operating system. We recommend that you enable Anti-Virus Protection as
soon as you have installed your disk with an OS.
Default: EGA/VGA
Default: All But Keyboard
Disabled
IBM 2169
i810-ITE8712
6.00 PG1.2g
Enabled
Enabled
Enabled
Enabled
Enabled
Floppy
CD-ROM
HDD-0
Enabled
Disabled
Enabled
On
Fast
Disabled
Disabled
6
Default: Disabled
22