Proximity Waypoints - Garmin 128 Owner's Manual

Waypoint List Page (continued)
If you highlight 'SYMBOL,' you'll be asked to select a
symbol.
1. select the symbol to be deleted and press
F
2. Press to confirm the 'DONE' prompt, highlight
the 'YES?' prompt, and press
Note: This feature is handy for deleting temporary
waypoints created by the TracBack function.

Proximity Waypoints

The GPS 126/128' s proximity waypoint function
warns you when you are getting too close to hazardous
waypoints. This function allows you to create up to
nine proximity waypoints and designate an alarm circle
for each waypoint. If you enter this circle, a warning
message will alert you.
To enter a proximity waypoint from the main
menu:
1. Highlight 'PROXIMITY WPTS' and press
2. Highlight the first empty waypoint field and press
F
.
3. Use the arrow keypad to scan through stored way-
points until desired waypoint appears (see page 24 ).
F
4. Press . The distance (DST) field will be automat-
ically highlighted.
F .
5. Press
F
6. Press the
To review or remove a proximity waypoint:
1. Select a proximity waypoint and press
2. Highlight 'REVIEW?' or 'REMOVE?' and press
If 'REVIEW?' is chosen, the waypoint definition
page will appear, and you may make any changes to
the selected waypoint (see pgs. 22-24). If 'REMOVE?' is
chosen, the proximity waypoint page will reappear
with the waypoint removed. Press
return to the Menu Page.
F
.
Enter the desired distance.
key.
Q
F
.
F
.
F
.
F
.
J
or to
REFERENCE
Waypoint List &
Proximity
Waypoints
Deleting waypoints by
symbol enables you to
delete a specific group of
waypoints without losing
all other waypoints.
Quickly edit proximity
waypoints by highlighting
the waypoint name and
pressing ENTER.
21