Troubleshooting - Kohler K4915 Maintenance Manual

Touchless urinal
Hide thumbs Also See for K4915:
Table of Contents

Advertisement

Available languages

Available languages

One-Year Warranty (cont.)
IMPORTER:
INTERNACIONAL DE CERÁMICA, S.A.B. DE C.V.
AV. CARLOS PACHECO NO. 7200
CHIHUAHUA, CHIH., MEXICO C.P. 31060
TEL: 52 (14) 29-11-11

Troubleshooting

This troubleshooting guide is for general aid only. A Kohler Authorized
Service Representative or qualified electrician should correct any
electrical problems. For warranty service, contact your dealer or
wholesale distributor.
Symptoms
Probable Causes
1.
Urinal does not
A. Batteries are not
flush.
B. Other objects are
C. Dirty sensor
The lamp on
A. Ten minutes have
2.
the battery
indicator
flashes once
when a user or
object is
present, but
B. Control stop and/or
little or no
water is
present.
C. The water pressure
Kohler Co.
Recommended Action
A. Verify batteries are
installed or batteries
are reversed.
B. Remove objects in
being detected.
C. Clean the sensor
window.
A. Wait ten minutes
not passed since
batteries have been
replaced. The urinal
is still in adjustment
mode.
B. Open the control
supply stop is
closed.
C. Increase the water
is low.
9
installed or are
installed properly.
proximity of the
urinal or adjust the
induction distance.
Refer to the "Adjust
the Induction
Distance" section of
this guide.
window. Refer to
the "Care and
Cleaning" section of
this guide for
recommended
cleaners.
for activation.
stop and/or supply
stop.
supply pressure.
085788-5-D

Advertisement

Table of Contents
loading

Table of Contents