Rinse Options; Rinse And Spin; Step 2. Set Water Temperature - Kenmore Automatic washers Owner's Manual And Installation Instructions

RINSE OPTIONS
(on some models)
A second rinse will remove more
detergent residue. It is especially
beneficial if extra detergent has been
used to remove heavy soils. Washers
with a RINSE OPTIONS Control allow
you to automatically add a second
rinse to the HEAVY DUTY Cycle.
Simply set the RINSE OPTIONS Control
on 2ND RINSE before you start the
washer. You won't have to come back
to select a second rinse.
2ND RINSE
ONE RINSE 2ND RINSE
ALL CYCLES HEAVY DUTY
CYCLE ONLY
0
RINSE AND SPIN
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may find an extra rinse and
spin is needed.
STEP 1. Set WATER LEVEL Control.
STEP 2. Set WATER TEMPERATURE
Control.
STEP 3. Set RINSE OPTIONS Control
(if available) to ONE RINSE.
STEP 4. Set the Cycle Selector Control
(Timer) knob to a RINSE setting:
• For fast agitation and spin, use the
HEAVY DUTY Cycle.
• For slow agitation and spin, use the
PERMANENT PRESS I Cycle.
• For slow agitation and fast spin, use the
NORMAL Cycle.
STEP 5. Pull Cycle Selector Control
(Timer) knob out to start washer.
llr_kVY DUT_ _iw,_
REN_N_IENT PRESlS I w
SPIN ONLY
A drain and spin may help shorten drying
times for some heavy fabrics or special-
care items by removing excess water.
STEP 1. Set RINSE OPTIONS Control (if
available) to ONE RINSE.
STEP 2. Set the Cycle Selector Control
(Timer) knob to a SPIN setting:
• For fast spin, use the NORMAL Cycle.
• For slow spin, use the PERMANENT
PRESS I Cycle.
STEP 3. Pull the Cycle Selector Control
(Timer) knob out to start washer.
_w mJ_t
pERMANENT filES61 1:
27