Kenmore Automatic washers Owner's Manual And Installation Instructions page 23

STARTING WASHER
STEP 1. Add measured detergent
directly into washer basket, Then place
a load of sorted clothes in the washer.
STEP 2. (OPTIONAL STEP) If desired,
add measured liquid chlorine bleach to
the liquid bleach dispenser; (details on
page 29).
STEP 3. (OPTIONAL STEP) If desired,
add measured liquid fabric softener to
the fabric softener dispenser (if avail-
able); (details on page 30).
STEP 4. Close washer lid.
STEP 5. Set WATER LEVEL Control O
based on the size of your wash load
(details on page 24).
STEP 6. Set the WATER TEMPERA-
TURE Control O (details on page 24).
STEP 7. Set RINSE OPTIONS Control
(if available); (details on page 27).
STEP 8. Push the Cycle Selector Control
(Timer) knob (_ in and turn to the right.
Set cycle and time according to the type
of fabric in the load (details on page 25).
STEP 9. Pull the Cycle Selector Control
(Timer) knob (_ out, The dial will rotate
as the cycle progresses. The knob will
not rotate.
STOPPING/RESTARTING
WASHER
• To stop the washer at any time, push
the Cycle Selector Control (Timer)
knob 1_ in.
• Pull the knob out to restart.
WATI-R LEVF_ WATI-R TEMPERATURE
ff M_2_ _
L__Q
PER_NE_T PRESS I_ _ _
23