Windsor Saber Glide SGE28 Operator Instructions Manual page 13

1. Key switch
2. Emergency stop button
3. One touch switch
4. Brush pressure switch
5. Solution control switch
6. Vacuum/squeegee switch
7. Display toggle switch
• Information Screen 1
• Information Screen 2
• Hour meter
• Fault codes and special icons
• Battery meter
8. Scrub Deck Shift Switch (36in only)
1. KEY SWITCH
Controls the power for the machine functions. To turn the machine power on, rotate key clockwise. When the
key is turned on the battery symbol will flash for 12 seconds while the system runs self-diagnostics and
returns scrub deck and squeegee to raised position, if necessary. The controller will not respond to other
commands until this routine is complete. To turn the machine power off, rotate key counterclockwise.
INFORMATION DISPLAY
2. EMERGENCY STOP BUTTON
This safety feature is designed to cut all power to the machine at any time. To shut the machine power off,
push the Emergency Stop switch. To reset the machine, rotate the switch clockwise.
INFORMATION DISPLAY
9. Recycle switch (optional)
10. Recycle indicator light (optional)
11. Headlight switch (optional)
12. Brake pedal
13. Parking brake lever
14. Directional control pedal and speed
reduction feature.
15. Steering wheel
16. Steering tilt lever
17. Horn button
18. Seat adjustment grab bar
19. Squeegee camber adjustment knob
20. Squeegee deflection adjustment knob
21. Side squeegee deflection adjustment knob
GLIDE 86037550 01/09/07
CONTROLS
3-6