dbx DriveRack Monitor Application Manual page 20

DriveRack™
Rear Panel Connections (480P)
Front Panel (480P)
20
Monitor Application Guide
Motorized Faders
The 31 motorized faders of the 480R make editing and recalling EQ settings a breeze. The 31
faders control the graphic EQ of the currently selected channel of the selected DriveRack™.
IEC Power Cord Receptacle
The 480P comes with switchable power supply that will accept voltages ranging from 100V-240V
at frequencies from 50Hz-60Hz. An IEC cord is included.
RS485 Link to 480R (DB-9 connector type)
This input connector is used to connect to the 480R.
RS485 Link to Network Master (DB-9 connector type)
This input connector is used to connect 480R to the network master.
RS485 Link to 480R (RJ-45 connector type)
This input connector is used to connect to the 480R.
RS485 Link to Network Master (RJ-45 connector type)
This input connector is used to connect 480R to the network master.
RS232 PC Connection
This input is used to connect a PC to the 480R.
RS485/ PC Select Button
This recessed button is used to select the link to master connector or the PC
Power Switch
Turns the 480P and 480R on and off.
dbx
®