dbx DriveRack Monitor Application Manual page 19

dbx
DriveRack™
Monitor Application Guide
Parameter Knobs
The parameter knobs of the 480R allow the user to edit parameters of selected effects of the select-
ed DriveRack™. The parameter knobs also provide the user different modes of functionality
including: coarse/fine encoding and etch-a-sketch, which allows the parameter buttons (when
used in program mode) to function navigate the program screen horizontally and vertically.
Network Access Keypad
This 12 button keypad is used to call up any one of the products that are used in a DriveRack™
network set up. Simply enter in the Id number of the device you wish to call up, and then hit the
enter button.
Channel Select Buttons
Instantly recalls the input channel EQ settings of the attached DriveRack™.
Output Mutes
The eight output mute buttons are used for independent output muting on all eight outputs of the
480R DriveRack™.
System Mute Button
The SYSTEM mute button (when pressed and lit) is used to bypass the output signal of any unit
that is used in the DriveRack™ network.
Hot Key Instant Access buttons
The 32 Hot Key buttons can be assigned to instantly access any program screen of any editing
page of any unit used in the DriveRack™ network. Up to 64 different instant access assignments
can be made. To assign a Hot Key instant access button to a selected page, navigate to the screen
page that you wish to assign, and then press and hold the desired Hot Key until the screen flash-
es. To store over any assigned Hot Key, simply repeat the procedure. Once a hot key has been
assigned, the user does not need recall or remember the individual DriveRack ID number.
®
19