Windsor SCE264 Operator Instructions Manual page 15

Walk behind scrubber
Table of Contents

Advertisement

13. BATTERY CHARGE LEVEL INDICATOR
Indicates the charge level of the batteries.
The meter display is divided into 10 vertical
bars. Bar illuminated on the far right indicate
full charge. Bars flashing near the left side
indicate the batteries should be recharged.
Further operation of the machine could
damage the machine or the batteries.
When the machine is left overnight with less
than a full charge, the display may initially
indicate a full charge. It will also indicate a full
charge if the batteries are disconnected, then
reconnected. After a few minutes of operation
the meter will give the correct charge level.
14. PARKING BRAKE
Locks front wheels to prevent unintentional
movement.
To set parking brake, push down to lock notch.
To release parking brake, push down and over
out of the lock down notch.
15. HOUR METER
Records the number of hours the machine has
been in operation. This information is useful
in determining when to service the machine.
CUTTER 24V (SCE) 86037010 02/21/07
CONTROLS
3-8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Saber cutter sce26410052270

Table of Contents