Location Requirements - Haier HWR05XCM User & Care Manual

LOCATION REQUIREMENTS

IMPORTANT: Observe all governing codes and ordinances. Check the location where the air
conditioner will be installed. Make sure you have everything necessary for correct
installation.
THE LOCATION SHOULD PROVIDE:
• A grounded electrical outlet within 6 ft. (183 cm) of where the power supply cord exits the air
conditioner, for models:
HWR05XCM ESA405M
• A grounded electrical outlet within 4 ft. (122 cm) of where the power supply cord exits the air
conditioner, for models:
ESA410M ESA412M
NOTE: Do not use an extension cord, plug adapter, surge protector or multi-outlet adapter.
• Free movement of air in the room to be cooled.
• A large enough opening for the air conditioner. (See Fig.1)
• The air conditioner must not be installed in a through-the-wall sleeve
or in a wall. It can only be installed in a double-hung window.
NOTE: The outside cabinet louvers must not be obstructed by bushes,
trees, etc. Air must be able to pass freely through the cabinet
louvers. (See Fig.2)
CABINET LOUVERS
WINDOW INSTALLATION
Window opening measurements: (See Fig.3)
A. Width
B. Height
WIDTH
PAGE 6
ESA406M
Fig. 2
INSTALLATION REQUIREMENTS
ESA408M
Fig. 3
B-HEIGHT
WIDTH
A-WIDTH
Fig. 1
WIDTH
HEIGHT
WIDTH