Garmin GMI 10 Installation Instructions Manual page 4

in-line switch
Notes:
• To add additional sensors to your NMEA 2000 network, follow the instructions included with the sensor.
• To learn more about NMEA 2000 and building a NMEA 2000 network, visit www.garmin.com.
• The GMI 10 is powered by the NMEA 2000 network.
4
NMEA 2000
device
(not included)
T-connector
(included)
Connecting the GMI 10 to an Existing
Ignition or
Fuse
-
+
12 Vdc battery
Power cable
T-connectors
Female
terminator
Creating a Basic NMEA 2000 Network
Drop cable
(included)
Existing NMEA 2000 network
NMEA 2000 Network
Drop cable
GMI 10
NMEA 2000
device
(not included)
NMEA 2000
device
(not included)
Additional
drop cable and
T-connector
(not included)
Male
terminator
GMI 10 Installation Instructions