Zone Indicators; Away Indicator; Stay Indicator; Cp5 Eight Zone Lcd Codepad - Bosch CC880/LP880, SC8016 Operator's Manual

CC880/LP880, SC8016 | Operators Guide | 3.0
Figure 3:

CP5 Eight Zone LCD Codepad

Figure 4:

Sixteen Zone LCD Codepad

The codepad is the communications interface
between you and your alarm system. Use the
codepad to issue commands. The codepad offers
both visual and audible indications that guide you
through the general operation.
The codepad incorporates numerous indicators.
There are zone indicators that show the condition of
each zone and four other indicators for general
status. The following pages outline a list of situations
and the relevant indicators that are seen.
3.1

Zone Indicators

The zone indicators (1 to 8) display the
1 2 3 ....
status of the zones. Table 2 lists the
various circumstances under which the
indicators display (such as, Zone
Sealed/Zone Unsealed).
Bosch Security Systems | 6/04 | 920036O.OG.162
Codepad Indicators
Table 2: Zone Indicator
Zone Indicator
On
Off
Flashing Fast
(0.25 sec. on/
0.25 sec. off)
Flashing Slow
(1 sec. on/1 sec. off)
3.2

AWAY Indicator

The AWAY indicator shows the system
is armed in AWAY Mode. The AWAY
indicator also flashes in unison with the
STAY indicator when programming
various options throughout the
Operator's Manual.
See Section 4.2 Arming in AWAY Mode for
information on the different methods of
arming the system in AWAY Mode.
Table 3: AWAY Indicator
AWAY Definition
Indicator
On System is armed in AWAY Mode.
Off System is not armed in AWAY Mode.
3.3

STAY Indicator

The STAY indicator displays that the
system is armed in STAY Mode 1 or
STAY Mode 2. The STAY indicator also
flashes in unison with the AWAY
indicator when programming various
options throughout the Operator's Manual.
See Section 4.3 Arming in STAY Mode 1 for
different methods of arming in STAY
Mode 1. See Section 4.4 Arming in STAY
Mode 2 to arm in STAY Mode 2.
Table 4: STAY Indicator
STAY Definition
Indicator
On System is armed in STAY Mode 1
or STAY Mode 2.
Off System is not armed in STAY
Mode 1 or STAY Mode 2.
Flashing twice Zone isolating mode or setting
a second STAY Mode 2 zones.
Flashing once Day alarm status – day alarm
every 3 sec. turned on.
Definition
Zone is unsealed
Zone is sealed
Zone is in alarm condition
Zone is manually isolated or
selected to be isolated
EN | 6