Function Of Each Button - LG WF-T10(~3)0(~2,6)1(~5)TP(H,E,F)(S,3) Service Manual

3-3. FUNCTION OF EACH BUTTON

▶ Changing various functions is possible only in PAUSE state.
Selection button does not work when the washer is in operation (Except for water level, water temp, water power button).
How to use delayed
washing
■ Use this function for delayed
washing.
■ Use it to set the delay time.
■ By pressing the button, it cycles
[3→4→5→...→11→12→14→
16→...→46→48→3] hours.
(Up to 48 hours can be
delayed).
■ To cancel delay time, turn the
power switch off.
How to select temp.
■ Use it to select hot or cold
water (When hot water only is
selected, hot water is supplied
for washing and cold water are
supplied for rinsing).
■ In WOOL, HOME DRY
program, cold water is selected
automatically (Hot water may
damage the fabric).
How to adjust the water level
■ By pressing the button, it cycles
[LARGE→LARGE•EX-LARGE→EX-LARGE
→SMALL→SMALL•MEDIUM→MEDIUM
→MEDIUM•LARGE→LARGE]
■ At FUZZY and JEAN program, water level is selected automatically
based on the amount of laundry.
■ Water level is set to MEDIUM for SPEEDY program, LARGE for
WOOL and DELICATE program, EX-LARGE for BLANKET program.
■ Water level can be adjusted even when the washer
is in operation.
Detergent deposit
display
■ Upon loading laundry, it
displays the correct amount of
detergent to be added
according to the amount of
laundry (based on
concentrated detergent).
16
Wash Process display
■ Indicates the current washing
status.
■ Next step is lit, current step blinks
and finished step is turned off.
NOTE
The display panel uses the
following abbreviation:
M(minutes), T(Times) and
M(minutes).
WARM
HOT
LEVEL
DELAY
START
WATER
Wash power
■ Use it to adjust the strength of
water current.
■ By pressing the button, it
cycles
[
S G
■ Strength of the water current can
be adjusted at any program.
At the beginning, it starts with
MED
( ).
S
WATER - DETERGENT
S TRONG
EX-
LARGE
L
ARGE
COLD
N ORMAL
M
EDIUM
S G ENTLE
MALL
WATER
WASH
TEMP.
LEVEL
POWER
].
N
D