Deactivating The Flash - Canon PowerShot A2600 Silver Extended User Manual

ç Contents
• When you specify multiple shots, image brightness and white
balance are determined by the first shot. More time is required
between shots when the flash fires or when you have specified to
take many shots. Shooting will stop automatically when the memory
card becomes full.
•
When a delay longer than two seconds is specified, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the flash fires.)

Deactivating the Flash

Prepare the camera for shooting without the flash as follows.
•
If a flashing [
shutter button halfway in low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
Configure the setting.
z z
To deactivate the flash, press
the <r> button repeatedly until
[!] is displayed.
z z To activate the flash, press
the <r> button again.
([
will automatically fire in low-light
conditions.
] icon is displayed when you press the
ç Chapter Contents
] is displayed.) The flash
74
Still Images