Changing The Screen Displayed After Shots - Canon PowerShot A2600 Silver Extended User Manual

ç Contents

Changing the Screen Displayed After Shots

Off Displays only the image.
Detailed
Displays shooting details
•
When [Display Time] is set to [Off] or [Quick]
Info] is set to [Off] and cannot be changed.
• By pressing the <l> button while an image is displayed after
shooting, you can switch the display information. Note that the
settings of [Display Info] on the [4] tab cannot be changed. By
pressing the <m> button, you can do the following operations.
- Protection
1
2
Configure the setting.
z
z
(= 132)
ç Chapter Contents
Set [Display Time] to
[2 sec.], [4 sec.], [8 sec.],
or [Hold] (
=
z Press the <o><p> buttons to
choose [Display Info]. Press the
<q><r> buttons to choose the
desired option.
z To restore the original setting,
repeat this process but choose
[Off].
(= 201).
(=
121
120).
120), [Display