Adding A Date Stamp; Deactivating The Flash - Canon PowerShot D30 User Manual

Deactivating the Flash

Prepare the camera for shooting without the flash as follows.
z z
Press the <r> button, press the <q><r>
buttons to choose [!], and then press
the <m> button.
z z
Once the setting is complete, [!] is
displayed.
z z
To restore the original setting, repeat this
process but choose [
•
If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
Still Images

Adding a Date Stamp

The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct
].
•
Date stamps cannot be edited or removed.
Still Images
(= 15).
1
Configure the setting.
z z
Press the <n> button, choose [Date
Stamp] on the [4] tab, and then choose
the desired option (= 26).
z z
Once the setting is complete, [DATE] is
displayed.
2
Shoot.
z z
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
z z
To restore the original setting, choose
[Off] in step 1.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Using GPS Using GPS
Functions Functions
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
42