Pace DC700X Operator's Manual page 8

SAFETY INFORMATION (cont.)
Safety aspects of connections
Full details of the rear panel are on page 8.
Connecting
Do not connect your set-top (or any other equipment such as a TV or VCR)
to the power supply until you have properly connected all the other cables.
Your set-top operates with a 120 V AC, 60 Hz power supply.
Do not connect your set-top to any supply other than this.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
This set-top is equipped with a two-wire power cord, with a polarized plug
WHEN SERVICING ONLY USE
IDENTICAL REPLACEMENT PARTS
at one end. The other end of the cord is fitted with a polarized connector,
CABLE IN
which is shaped such that it can be fitted only one way into the power
input connector of your set-top. Connect this end first, before inserting the
polarized plug into the wall AC outlet.
Disconnecting
Disconnect your set-top from the power supply before you disconnect any
other equipment from its rear panel.
The only way to disconnect your set-top from the power supply is to remove
the power cord from the wall AC outlet. Therefore, you must install your set-
top near to the wall AC outlet, which should be easily accessible.
If you are in any doubt about the power cord, its plug, or its connection,
consult a qualified electrician.
6
TO TV 1394
Pr Pb
COMPONENT VIDEO
R L
ETHERNET AUDIO OUT S-VIDEO
The CABLE IN connector is designed for
connection to a cable network only.
You must not connect any other equipment,
such as a VCR, to this input.
Y
SATA
VIDEO OUT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
WHEN SERVICING ONLY USE
IDENTICAL REPLACEMENT PARTS
DIGITAL AUDIO
CABLE IN
OUT OPTICAL IR RECEIVE
POWER INPUT
120V AC 60Hz
TO TV 1394
DOUBLE INSULATED
POWER INPUT
The model number, serial
number and electrical
rating of this set-top are
on a label on its base.
ETHERNET