Description Of Parts; Installing The Coffee Maker - Gaggia TITANIUM Espresso Machine Operating Instructions Manual

ENGLISH

DESCRIPTION OF PARTS

See Fig.01
1 Coffee bean container
2 Coffee bean container cover
(aroma preserver)
3 Grinding control knob
4 Dose control knob
5 Ground coffee doser cover
6 Cup Heater
7 ON-OFF switch
8 Water tank cover
9 Water tank
10 Coffee grounds drawer
11 Power cord
12 Drip tray + plate
13 Height adjustable coffee dispenser
14 Steam / hot water nozzle and pipe
15 Front cover
16 Steam knob
17 Coffee dispenser
18 Control panel
19 Key of coffee dispenser
20 Cleaning brush
21 Ground coffee measuring scoop
Control panel
22 Espresso coffee selector button / Page up in programming mode
23 Normal coffee selector button / Page down in programming
mode
24 "Caffe lungo" selector button / ESC in the programming mode
25 Ground coffee selector button
26 Hot water selector button
27 Descaling selector button
28 Programming button / "OK" in the programming mode
29 LCD display
30 Full tray warning light
4

INSTALLING THE COFFEE MAKER

For your own safety and the safety of others, follow the "Safety
Rules" (see chapter 3).
4.1 Packaging
The original packaging was designed and made to protect the appliance
during shipment.
We recommend you keep it for future needs.
4.2 Preliminaries
• Remove the coffee maker from the packaging and position it in a
suitable location that meets the requirements specified and described
in the safety rules (chap.3).
• Open the machine door, take the drip tray (12) from the package,
and fit the dregs box (10); then, fit the drip tray in the machine
(Fig.21).
• Make sure that the drip tray and plate (Fig.01, pos. 12), the coffee
grounds drawer (10) and the coffee dispenser (17) are fitted correctly
and that the front cover (15) is closed.
• Keep the cleaning brush (20) and the coffee dispenser key (19)
supplied with the appliance within easy reach.
If the display signals a fault when you switch on the
machine, it means that one of the above-described
components has not been properly positioned (Par.16).
4.3 Preparing the coffee maker for use
• Open the water tank cover (Fig.02) and remove the tank (Fig.03).
Rinse and fill with fresh potable water (Fig.04); we recommend
that you do not exceed the "MAX" level mark. Replace the water
tank in its housing and reposition the cover on top.
Always fill the tank (9) with fresh still water. Hot water
and other liquids can damage the tank and/or the
appliance. Do not operate the appliance without water: make
sure that there is enough water inside the tank.
• Lift the cover (Fig.05) and fill the container with coffee beans
(Fig.06).
Use coffee beans only. Ground and instant coffee, as
well as other items, will cause damage to the appliance.
• Set the cover back in place on the coffee container (1).
• Insert the plug into the outlet on the back of the coffee machine (Fig.07)
after making sure that the on/off switch (7) is set on "O".
Insert the plug on the other end of the cord into a suitable wall outlet.
• The machine on/off switch is set on "O" (OFF); to turn the machine
• 28 •