Using The Face Self-Timer - Canon IXUS 210 Hardware Manual

Using the Face Self-Timer

Changing the number of shots
After touching
shots. Touch Ú to complete the setting.
•
Shutting both eyes will also be detected as a wink.
•
If a wink is not detected, the shutter will release approximately 15
seconds later.
•
If there are no people in the shot when the shutter button is pressed
fully, the camera will shoot after a person enters the shot and winks.
Using the Face Self-Timer
To take a photo that includes the photographer, such a group photo,
compose the shot, and press the shutter button. The camera will shoot
approximately two seconds after you enter the shot and it detects your face
(p. 84).
62
on the screen in Step 1, touch op to change the number of
Choose
●
Choose
touch
●
Touch
Compose the shot and press the
shutter button halfway.
●
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
The lamp will blink and the self-timer
sound will play.
.
in Steps 1 – 2 on
.
, then touch Ú.
p. 54, then