Checking the Focus
You can magnify the area of a recorded image that was inside the AF
Frame, or the area of a face that was detected, to check the focus.
Touch l to switch the focus
check display
A white frame will appear where the AF
frame or face was when the focus was
set.
A gray frame will appear on a face
detected during playback.
The area within the orange frame appears
magnified.
Switch frames.
●
Move the zoom lever toward k once.
The screen shown to the left will appear.
●
Touch
to move to a different frame
when multiple frames appear.
Change the magnification level or
location.
●
Moving the zoom lever, or touching the
magnified image at the bottom right of the
screen, or
displayed magnification rate.
●
If you drag across the image on the lower
right, you can move the location of the
displayed area.
●
Touching Ú, or the image in the upper left
resets the display to Step 1.
(p.
43).
will change the
111