Using The Face Self-Timer - Canon PowerShot A800 User Manual

Using the Face Self-Timer

The shutter will release approximately two seconds after the camera detects
a new face (p.
the image, such as a group photo.
Changing the number of shots
In Step 1, press and hold the n button for a moment, then press the qr
buttons to change the number of shots. Press the n button to complete the
setting.
Even if your face is not detected after joining the subjects, the shutter will
release approximately 15 seconds later.
Downloaded From camera-usermanual.com Canon Manuals
62
73). You can use this when the photographer wants to be in
Choose .
Follow Step 1 on
Compose the shot and press the
shutter button halfway.
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
The lamp will blink and the self-timer
sound will play.
Join the subjects and look at the
camera.
When the camera detects a new face, the
lamp and self-timer sound will speed up
(the lamp remains lit when the flash will
fire), and two seconds later the shutter will
release.
To cancel shooting with the timer after
countdown has started, press the p
button.
p. 58 to choose .