Setting The Room Code; Turning The Touch Pad On Or Off; Changing The System Standby Timeout - Bose WAVE® RADIO III Owner's Manual

Setting the room code

radio III comes from the factory ready to
®
Your Wave
operate as a second room (room code B) when
®
connected to a Bose link enabled Lifestyle
you want to use your Wave
system beyond a second room you will need to change
the room code to match that of the remote control you
are using for that room.
Refer to your Lifestyle ® system owner's guide for more
information on room codes.
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
ROOM- B
The dashes following the room letter
indicate how the microswitches should
be set on the Lifestyle
control.
3. Press Time – or Time + to select a
room code other than room B.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
®
system. If
radio III with your Lifestyle
®
>
six times until
is displayed.
®
remote
Turning the touch pad
on or off
If you do not wish to use the touch pad feature you can
turn it off.
®
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
until TOUCH PAD- is displayed.
3. Press Time – or Time + to select
OFF or ON.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
Changing the system
standby timeout
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
until AUTO OFF- is displayed.
3. Press Time – or Time + to select NO
or YES.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
P Y W
ERSONALIZING OUR
>
seven times
>
eight times
®
R III
AVE ADIO
English – 19