Re-Scanning Digital Radio Stations; Displaying Station Information; Displaying Station Signal Strength - Bose WAVE® RADIO III Owner's Manual

L R
ISTENING TO ADIO

Re-scanning digital radio stations

You can re-scan for available digital radio stations at any
time DIGITAL RADIO is selected. This capability is useful
if you change the location of the Wave
decide to connect the external antenna.
1. Press and hold Mute until "AUTOSCAN"
is displayed, followed by
"PRESS PRESET 3 TO CONFIRM."
2. Press the Presets 3 button. The messages,
"PLEASE WAIT SCANNING" appears on the
display until scanning is finished.
When scanning is finished, the first primary station is
played.

Displaying station information

There are three ways to display information about the
currently playing digital station:
• Station name (default setting):
• Current program content:
• Program type:
To change the way station information displayed,
press Play Mode until the type of information you
want is displayed.
12 – English
radio III or
®

Displaying station signal strength

For the current station, signal strength is displayed as a
numeric percentage of full signal strength and its
classification.
To view the signal strength of the current station,
press and hold Play Mode.
The signal strength ranges are:
Percentage Classification
0 - 19 Low
20 - 39 Poor
40 - 79 Moderate
80 - 89 Good
90 - 100 Very Good
Note: If the station is "UNAVAILABLE" or "OFF AIR," no
signal quality information is available.
Note: Due to the technology used in digital radio broad-
casting, the TALK RADIO mode for FM and AM radio is not
available for digital radio stations.