Getting To Know Your Router; Front Panel - Belkin N450DB User Manual

GeTTInG TO KnOW YOUR ROUTeR

front Panel

A
B
a) Router status light
Your Router's status is shown by the light on the front.
Off: The Router is not plugged into a power source.
blinking blue: The Router is starting up.
solid blue: The Router is connected to the Internet.
blinking amber: The Router can't detect the modem. Either the
modem is off, is not plugged into the Router, or is unresponsive.
b) Wi-fi Protected setup (WPs) light and button
The WPS button on the front of your Router can be
used to help establish a secure connection between
your Router and other WPS-enabled Wi-Fi devices
such as computers. To use WPS, refer to page 9.
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection.
Off: Idle
blinking blue: The Router is listening for a WPS-
enabled computer or other device.
solid blue: The Router has made a secure
connection with the computer or other device.
amber: A connection was not created.
29