From the Configure menu, select Configure XDLC
5
Port Stations. Then configure the following.
Prompt
Port Number:
Station
Number:
Station Type:
Station
Address:
Autocall
Mnemonic:
QLLC
Options:
From the Configure menu, select Configure Router -
6
> Configure Interface States. Then configure the
following.
Prompt
Interface #1
State:
Interface #5
State:
Enter
Result/Description
2
Identifies port
number 2 of this
node.
1
The number of the
station on the
multidrop line.
SDLC
Identifies the
station type as
SDLC.
C1
The station address
on the multidrop
line.
SDLCC1001
Identifies the
remote address that
is called when
polling activity is
detected on the
SDLC line.
XID3
Specifies that SIDs
will pass
transparently.
Enter
Result/Description
Enabled
Enables the LAN
interface.
Enabled
Enables the LAN
interface.
The XDLC
Stations record
appears.
The Configure
Interfaces record
appears.