Prompt Enter Entry Number - Motorola 68230 - Vanguard 300 DSU/CSU Operator's Manual

From the Configure menu, select Configure LLC to
7
SDLC Tables -> Frame Relay Station Table. Then
configure the following
Prompt
Entry
Number:
Frame Relay
Port Number:
Frame Relay
Station
Number:
QLLC
Station
Address:
XID Value:
From the Configure menu, select Configure FRI
8
Stations. Then configure the following.
Prompt
Port Number:
Station
Number:
Station Type:
No. of PVC
Enter Result/Description
1 References this
record.
3 Identifies the
Frame Relay port
this LLC-SDLC
conversion station
is connected to.
1 The Frame Relay
station number on
the Frame Relay
port the LLC-
SDLC conversion
station is connected
to.
FF Identifies the
primary station
address FF for
QLLC primary
(HPAD) address.
020001744001 This is unique for
each application.
Enter Result/Description
1 Identifies port
number 1 of this
node.
1 Identifies the
station being
configured.
ANNEX_G Adds a packet
header and LAPB
header to frame for
reliability checking
between Frame
Relay stations.
0 Specifies the
The Frame Relay
Station table
appears.
The FRI Stations
table appears.