Motorola 68230 - Vanguard 300 DSU/CSU Operator's Manual page 35

Port Number:
Station
Number:
Station Type:
No. of PVC
Chan:
No. of SVC
Chan:
Starting SVC
Chan:
Node 200 Configuration Sequence
Follow these steps to configure node 200 as shown in Figure 3-1.
3 Identifies the
physical port
position at the rear
of the unit and is
also the reference
number for this
record. The port
number selected
must be for a FRI
port.
1 Identifies the
station being
configured.
BYPASS Bypass does not
add packet or
LAPB headers,
meaning there is no
reliability check,
but there is more
throughput
capability.
0 Specifies the
number of channels
used for Permanent
Virtual Circuits.
16 Specifies the
number of logical
SVC channels on
this port.
1 Specifies the
starting logical
channel number for
the SVCs on this
link.