Mac Authentication Radius Profile; Mac Authentication Radius Stationid Case; Mac Authentication Radius Stationid Delimiter; Add Ip Filter - HP MSM3xx Reference Manual

no mandatory authentication
MAC-based authentication is not mandatory.

mac authentication radius profile

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac authentication radius profile <radiusname>
Specifies the name of the RADIUS profile to use for MAC-based authentication.
no mac authentication radius profile
Do not use a RADIUS profile.

mac authentication radius stationid case

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac authentication radius stationid case (uppercase | lowercase)
Specifies the case applied to the station delimiter if it is a letter.

mac authentication radius stationid delimiter

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac authentication radius stationid delimiter (null | colon | dash | dot | space
| comma | under)
Specifies the one-character delimiter that will be used to format both the calling station ID and the
called station ID attributes in RADIUS packets.
mac authentication
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac authentication
Enables support for MAC-based authentication.
no mac authentication
Disable support for MAC-based authentication.

add ip filter

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
add ip filter <ip address>/<mask>
Adds an IP filter to the list of destination addresses that traffic will be accepted for. All other
traffic will be blocked.
If the list is empty, then all wireless-to-wired LAN traffic is permitted.
Where:
IP address.
<address>
Subnet mask in CIDR format. Specifies the number of bits in the mask.
</mask>
CLI commands
2-61