Firmware-Update Start; Firmware-Update Time; Firmware-Update Uri; Firmware-Update Weekday - HP MSM3xx Reference Manual

CLI commands
(Different means older or newer. This enables you to return to a previous firmware version if
required).
Configuration settings are preserved during the update unless stated otherwise in the release
notes for the firmware. However, all active connections will be terminated. Users will have to log
in again after the AP restarts

firmware-update start

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
firmware-update start
Upload the firmware based on a specified URI. This URI can be set with the command: firmware-
update uri.

firmware-update time

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
firmware-update time <time>
Sets the time of day the scheduled firmware upgrade will take place.
Parameters
Time as hh:mm:ss. For example: 15:44:00.
<time>

firmware-update uri

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
firmware-update uri <uri>
Sets the URI where the AP will retrieve new firmware.
no firmware-update uri
Clears the firmware URI.

firmware-update weekday

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
firmware-update weekday (everyday | monday | tuesday | wednesday | thursday |
friday | saturday | sunday)
Sets the day when the scheduled firmware upgrade will take place.

snmp-server trap firmware-update

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap firmware-update
Send a trap on firmware update.
no snmp-server trap firmware-update
Do not send a trap on firmware update.
2-31