Table of Contents
Advertisement
To Enter Starting Valet Mode:
With the system disarmed, and depressing the brake pedal, Press & Hold the Valet
Switch for 2 seconds.
• The siren will chirp twice, the parking lights will flash twice and the Status
Indicator Light will illuminate solid Green to confirm that the system is in
Starting Valet Mode.
• There is no audible reminder that the system is in Starting Valet mode.
To Enter both Modes (Full Valet Mode):
With the system disarmed, Press & Hold the Valet Switch for 4-6 seconds with the
brake pedal in both conditions. For example, start pressing the Valet Switch with
the brake pedal unpressed; as soon as the two chirps are heard, press the brake
pedal but do not release the Valet Switch. As soon as a second set of two chirps is
heard, the Valet Switch may be released. The system is now in Full Valet Mode.
It does not matter in what order the pressed or unpressed brake pedal occurs.
• Once the system is in Full Valet Mode the Status Indicator Light will slowly
alternate Green and Red to confirm that the system is in Full Valet Mode. This
indication is present whenever the system is in Full Valet Mode.
• There will be the single chirp reminder every time the ignition turns off. This
is for the Valet Mode part of the Full Valet Mode condition.
Alarm Valet Mode:
WITH THE SYSTEM DISARMED,
AND WITHOUT DEPRESSING
THE BRAKE PEDAL, PRESS
AND HOLD THE VALET
SWITCH FOR 2 SECONDS
Full Valet Mode:
WITH THE SYSTEM DISARMED, PRESS AND HOLD
THE VALET SWITCH WITH AND WITHOUT DEPRESSING THE BRAKE
PEDAL. HOLD THE VALET SWITCH UNTIL 4 CHIRPS TOTAL ARE HEARD.
To Exit any of the 3 forms of Valet Mode:
Simply Press & Release the Valet Switch at any time.
• The Status Indicator Light will turn off to confirm exit from either Alarm Valet
Mode, Starting Valet Mode, or both.
Starting Valet Mode:
WITH THE SYSTEM DISARMED,
AND PRESSING THE BRAKE
PEDAL, PRESS AND HOLD THE
VALET SWITCH FOR 2 SECONDS
Page 20
PROGRAMMING THE MAX-E
The Omega MAX-E is a sophisticated, yet flexible security and convenience
system. Many of its operations may be configured as the user desires- "Programming
Mode" allows you to configure 36 operational features to suit your wants and needs.
Your vehicle ignition key and the Valet Switch are used to enter the Programming
Mode, as described by the three steps listed below. Once in Programming Mode,
the Valet Switch is used to access the desired feature, and the transmitter is then used
to change the chosen feature's status. During the process, the siren and the Status
Indicator Light indicate certain conditions of Programming Mode and the chosen
feature's status.
Once the system is in Programming Mode, the Valet Switch is then pressed and
released the number of times equal to the feature number which is to be accessed
for programming. After pressing the Valet Switch as many times as the feature
number, the siren will chirp the same number of times and the Status Indicator Light
will flash the same number, between pauses.
Once the feature has been selected its status, or setting, can be chosen by
pressing the appropriate button on the transmitter. Basically, pressing the transmitter's
"Arm/Lock" button turns the feature on, or pressing the transmitter's "Disarm/
Unlock" button turns the feature off. Features which are not "on or off" features,
such as the activated alarm duration of 30 or 60 seconds, are noted otherwise.
To Enter Programing Mode:
Step 1
Turn the vehicles's ignition on.
Step 2
Turn the ignition off.
Step 3
Within 5 seconds, Press & Release the Valet Switch 5 times.
•The siren will chirp then sound briefly and the Status Light will
flash to confirm that the system is entering Programing Mode.
•Once in Programming Mode, if 10 seconds of no programming
activity occurs, the system will exit Programming Mode. Program-
ming activity is the pressing of the Valet Switch or pressing a trans-
mitter button once a feature is accessed.
To Access a Feature:
Step 4
Within 10 seconds, Press & Release the Valet Switch the same num-
ber of times as the desired feature's number.
•The siren will chirp and the Status Indicator Light will flash as
many times as the Valet Switch was pressed to indicate the feature
number which is now accessed.
Page 25
Advertisement
Table of Contents
