Table of Contents
Advertisement
Auxiliary Output Notes:
• The 2nd Channel Output may be activated anytime, provided the vehicle's igni-
tion is off. While the ignition is on, the 2nd Channel Output can be operated as
long as a vehicle door is open; this prevents the output from being accidentally
activated while driving.
• If feature #17 is programmed to have the 2nd Channel Output disarm the sys-
tem, the doors will unlock* when the output is activated; and there is an audible
confirmation only of two siren chirps (the lights do not flash).
• Regardless of the system's armed or disarmed status and regardless of feature
#17's setting, when the 2nd Channel Output is operated the system chirps twice
but the lights do not flash.
• 3rd Channel Output may be activated at any time, regardless of the ignition
being on or off, and regardless of the security system's status.
• The 3rd Channel Output has no audible and/or visual confirmation.
*
An optional doorlock interface must be installed. When the 2nd Channel Output is operated, all of the doors
will unlock, even if the vehicle is configured with Driver's Door Priority unlocking.
SILENT ARMING AND DISARMING
The transmitter can also silently Arm or Disarm the system. Pressing the
"II" button twice simply reverses, or "toggles" the Armed or Disarmed status
that the system is in at the time.
To Silently Arm or Disarm the System:
Press & Release the "Auxiliary #2 Output" Button ( II ) Twice
Silent Arming and Silent Disarming are both operated by double-pressing the same transmitter button.
Press
2 X
DUAL-ZONE IMPACT SENSOR
Sensors:
The Omega MAX-E security system is equipped with a Dual-Zone
Shock Sensor to increase the effectiveness of the system.
• If desired, the sensor zone only can be bypassed when the system is armed with
the transmitter, but leaving the other protection zones in place. This feature is
convenient when environmental factors, such as hail or thunderstorms, may lead
to the system being activated erroneously (see next page for this procedure).
• The Omega MAX-E control module features dual auxiliary sensor ports, which
easily allows the addition of a further optional sensor.
THE SIREN
THE PARKING LIGHTS
WILL NOT
WILL FLASH ONCE IF
CHIRP
ARMING, TWICE IF
THE DOORS WILL LOCK IF
ARMING, UNLOCK IF DISARMING
An optional doorlock interface must be installed
Page 14
twelve times, pausing, then repeating. Within 10 seconds, press and release the
transmitter's "Arm/Lock" button to turn on "Open Door Bypass Of Ignition
Locking" (the siren will chirp once) or the "Disarm/Unlock" button to turn this
feature off (the siren will chirp twice).
#13 Chirp Confirmation:
This feature allows the permanent removal of the system's chirping the siren as
an audible confirmation when performing functions such as Arming and Disarm-
ing. Please note that utilizing this feature to remove the confirmation chirps does
not affect siren chirping operations associated with the Unauthorized Transmitter
Alert warning, sensor prewarning or Programming Mode.
Programming the Chirp Confirmation: Follow Steps 1 to 4 on page 25; at
Step 4 the Valet Switch will be pressed and released thirteen times. The system's
response will be thirteen siren chirps, and the Status Light flashing thirteen times,
pausing, then repeating. Within 10 seconds, press and release the transmitter's
"Arm/Lock" button to turn the Chirp Confirmation on (the siren will chirp once) or
the "Disarm/Unlock" button to turn the Chirp Confirmation off (the siren will chirp
twice).
#14 Confirmation Chirps In Valet Mode:
While the system is in the Valet Mode, the transmitter will still remotely lock and
unlock the vehicle's doors. This feature adds the confirmation horn chirps if the
transmitter is used to lock or unlock the doors while the system is in Valet Mode.
Programming the Chirp Confirmation: Follow Steps 1 to 4 on page 25; at
Step 4 the Valet Switch will be pressed and released fourteen times. The system's
response will be fourteen siren chirps, and the Status Light flashing fourteen times,
pausing, then repeating. Within 10 seconds, press and release the transmitter's
DISARMING
"Arm/Lock" button to turn the Confirmation Chirps In Valet Mode on (the siren will
chirp once) or the "Disarm/Unlock" button to turn it off (the siren will chirp twice).
#15 Activated Alarm Cycle:
This feature allows the option of a 30 or 60 second Alarm Duration, which is
when the system has activated in Armed state, sounding the siren and flashing the
parking lights.
Changing the Alarm Duration: Follow Steps 1 to 4 on page 25; at Step 4 the
Valet Switch will be pressed and released fifteen times. The system's response will
be fifteen siren chirps, and the Status Light flashing fifteen times, pausing, then
repeating. Within 10 seconds, press and release the transmitter's "Arm/Lock"
button to set the Alarm Duration for 60 seconds (the siren will chirp once) or the
"Disarm/Unlock" button to set the Alarm Duration for 30 seconds (the siren will
chirp twice).
Default On
Default Off
Default 60 Seconds
Page 31
Advertisement
Table of Contents
