Setting Up; Protective Sheet Removal - Oki OKIPAGE 10e Setup Manual

Setting up

Before connecting this printer to a PC and power sup-
ply, the toner cartridge must be installed and paper in-
serted in the paper tray.

Protective sheet removal

1. Remove any adhesive tape and packaging from
the printer. Press both release buttons (1) and
open the cover.
CAUTION:
Never expose the image drum unit to light for more than 5
minutes. Never expose the image drum unit to direct sun-
light. Always hold the image drum unit by the ends. Never
touch the surface of the green drum inside the image drum
unit.
Setup Guide
2. Remove the image drum (1) from the printer.
3. Remove the protective sheet (1) from the image
drum (2).
4. Replace the image drum.
English
7