3.
Start the Status Monitor
4.
Click on [Printer Setup] tab - [Printer Menu] button - [Paper tab]
- [Manual Feed] button. Adjust the media type to Transparency
and the paper size to the size of the transparency being used.
5.
Click on the [Apply] button, [Close] button then [OK] button to
set the printer for transparencies.
Remember to reset the printer for normal paper after printing
transparencies.
B4350, B4350N, B4350NPS
Using the control panel on your printer, you can choose:
which paper to use
l
the size of the paper you wish to use
l
the weight of the paper (thickness)
l
the type of paper
l
l If the settings in the printer differ from those selected on your
computer, the printer will not print and the LCD will display an error
message.
l The following printer settings are given as a guide only. Some
software applications require the paper feed, size and media
settings to be selected from within the application (page setup).
l Although media properties can be set in the printer driver for
particular jobs, it is recommended that when filling a tray with
media you manually set the printer to match the media as described
here.
Status Monitor.
Status Monitor
Status Monitor
NOTE
NOTE
PAPER RECOMMENDATIONS > 40