Face Up And Face Down Printing - Oki B4200 User Manual

2.
Adjust the rear paper support (2) to the size of paper you are
using by gripping the lugs (3), tilting and sliding the support
forwards or backwards as necessary.
3.
Adjust the paper guides (1). It is important to adjust the paper
guides correctly to ensure that the paper is not skewed in the
print process. Paper jams may occur if this operation is not
carried out correctly.
4.
Replace the tray in the printer. The paper level indicator (4)
provides a visual indication of how much paper is left in the
tray.
If you have the optional second paper tray (Tray 2) and you are printing
from the first (upper) tray (Tray 1), you can pull out the second (lower)
tray to reload it. However, if printing from the second (lower) tray, do not
pull out the first (upper) tray as this will result in a paper jam.

FACE UP AND FACE DOWN PRINTING

For face down printing, make sure the rear paper exit tray is closed
(the paper exits from the top of the printer). The paper exit bin on the
top of the printer stacks printed pages face down, capacity 150 sheets
of weight 80 g/m². Pages printed in reading order (page 1 first) will be
sorted in reading order (last page on top, facing down).
For face up printing, make sure the face up rear paper exit tray is open
and the paper guide is extended if required. In this condition, paper
will exit via this path, regardless of driver settings. Paper is stacked in
reverse order, capacity 50 sheets of weight 80 g/m².
Always use this tray and the manual feed tray for heavyweight stocks
to reduce the possibility of paper jams.
NOTE
PAPER RECOMMENDATIONS > 37