Face Up And Face Down Printing - Oki B4100 User Manual

If you are installing legal size paper, open out the paper tray extender located
at the rear of the paper tray.
2. Adjust the rear paper support (2) to the size of paper you are using
by gripping the lugs (3), tilting and sliding the support forwards or
backwards as necessary
3. Adjust the paper guides (1). It is important to adjust the paper
guides correctly to ensure that the paper is not skewed in the print
process. Paper jams may occur if this operation is not carried out
correctly.
4. Replace the tray in the printer. The paper level indicator (4)
provides a visual indication of how much paper is left in the tray.
If you have the optional second paper tray (Tray 2) and you are printing from
the first (upper) tray (Tray 1), you can pull out the second (lower) tray to
reload it. However, if printing from the second (lower) tray, do not pull out
the first (upper) tray as this will result in a paper jam.

FACE UP AND FACE DOWN PRINTING

For face down printing, make sure the rear paper exit tray is closed (the
paper exits from the top of the printer). The paper exit bin on the top of
the printer stacks printed pages face down, capacity 150 sheets of 20 lb.
paper. Pages printed in reading order (page 1 first) will be sorted in
reading order (last page on top, facing down).
For face up printing, make sure the face up rear paper exit tray is open and
the paper guide is extended if required. In this condition, paper will exit
via this path, regardless of driver settings. Paper is stacked in reverse
order, capacity 50 sheets of 20 lb. paper.
Always use this tray and the manual feed tray for heavyweight stocks to
reduce the possibility of paper jams.
NOTE
NOTE
PAPER RECOMMENDATIONS > 37