Table of Contents
Advertisement
information about the B4300, B4300n, B4300nPS printers. Note,
however, that the RS232 Menu and Network Menu are not relevant to
the B4200 printer.
CHANGING THE DISPLAY LANGUAGE
Carry out the following instructions to change the language that is
displayed in the Status Monitor.
1.
Start the Status Monitor.
2.
Select the Printer Setup tab.
3.
On the Maintenance 2 tab, select the required language in the
[Language] dropdown menu.
4.
Click on [OK].
PRINTING MENU SETTINGS
The menu settings can be printed as a menu map as follows.
Using the control button
1.
Press the control button to take the printer off-line.
2.
Press and hold down the control button for at least two
seconds, but less than five seconds.
3.
The printer prints a list of the menu settings and a demo print
page.
Demo and menu pages can also be printed using the printer Status
Monitor.
NOTE
OPERATOR PANELS > 22
Advertisement
Table of Contents
