Table of Contents
Advertisement
WHEN TO REPLACE THE TONER CARTRIDGE
B4200
Replace the toner cartridge after Toner Low displays in the printer
Status Monitor. Also, the Error LED indicator slowly blinks when toner
is low. After Toner Low displays, the printer will print about 100 more
pages then display Toner Empty and stop printing. Printing will
resume after a new toner cartridge has been installed.
B4300, B4300N, B4300NPS
When the toner is running low, TONER LOW is displayed in the
operator panel LCD. If printing continues without replacing the toner
cartridge, CHANGE TONER is displayed and printing is cancelled.
Printing will resume after a new toner cartridge has been installed.
REPLACING THE TONER CARTRIDGE
It is recommended that you clean the LED array at the same time as
you change the toner cartridge.
The toner used in this printer is a very fine dry powder contained in the
toner cartridge.
Have a sheet of paper handy so that you have somewhere to place the
used cartridge while you install the new one.
Dispose of the old cartridge responsibly, inside the pack that the new
one came in. Follow any regulations, recommendations, etc., which
may be in force concerning waste recycling.
If you do spill any toner powder, lightly brush it off. If this is not
enough, use a cool, damp cloth to remove any residue. Do not use hot
water, and never use solvents of any kind. They will make stains
permanent.
If you inhale any toner or get it in your eyes, drink a little water or
bathe your eyes liberally in cold water. Seek medical attention
immediately.
WARNING!
CONSUMABLES AND MAINTENANCE > 68
Advertisement
Table of Contents
