Table of Contents
Advertisement
Programming
Customizing Features and Operations
Many of your fax machine's features and functions
have settings which can be changed to customize
the operations of your fax machine.
Because each country has different regulations, you
may not be able to access all of the settings listed in
this chapter. If you have trouble changing a setting,
contact your dealer for assistance.
Viewing Your Current Settings
Follow these instructions to obtain a configuration
report showing your fax machine's current settings.
1
Press the Select Function key.
2
Press the 6/Report Print One Touch key.
The display will show 1:ACTIVITY REPORT.
3
Using the numeric keypad, press 4.
The display will show 4:CONFIGURATION.
4
Press the Yes
key. The report will begin printing.
User Function Settings
User function settings allow you to customize the
general operation of your fax machine. Refer to User
Function Settings List to determine which settings
you may need to change, then refer to Changing
Your User Function Settings to make the change.
User Function Settings List
01 MCF (SINGLE-LOC.): This function automati-
cally prints a Message Confirmation Report after
each single-location transmission or polling
transmission. Available settings are on and off.
02 MCF (MULTI-LOC.): This function automatically
prints a Message Confirmation Report after each
multiple-location transmission. Available settings
are on and off.
03 ERR REPORT (MCF): This function can be used
as an alternative to function 01 above (that is,
function 01 off and function 03 on). Your machine
will print a report only if an error has occurred.
47
Programming
Advertisement
Table of Contents
