Accessing The Full Screen Video Page; Full-Screen Video Settings; Full Screen Device - Nvidia Quadro Workstation User Manual

Chapter 7
Configuring Key ForceWare Graphics Driver Features
• Supported by any NVIDIA GPU-based multi-display graphics card.

Accessing the Full Screen Video Page

1 First, make sure you have at least two displays connected to your computer. If you
have only one display connected, you will not see the Full Screen Video menu
option on the NVIDIA display menu.
2 On the nView Display Settings page, set nView mode to a multi-display mode,
such as Clone or Dualview.
3 Open the DVD or video application and click Full Screen Video from the NVIDIA
display menu.
If you need help in accessing the NVIDIA display menu, see
NVIDIA Display Control Panel Pages" on page
Figure 7.12

Full-Screen Video Settings

Full Screen Device

Select the display on which you want video to be played back in full-screen mode.
Note: After selecting any of these Full Screen Device settings, you may need to exit
and restart your video application for the settings to take effect.
• Disable
controls).
• Primary display/Secondary display settings
nView Clone modes.
To enable Full-Screen Device functionality in nView Clone mode, click either
Primary display or Secondary display as the full screen device.
• Auto-select
modes. Auto-select enables full-screen device functionality, which creates the full-
screen mirror on the display on which there is no overlay. This implies that if the
video being played is dragged to the other display, the full-screen mirror image
will automatically switch displays.
126
and Figure 7.13 show Full Screen Video settings pages.
(Figure 7.12) disables Video Mirror (including the Full screen video zoom
(Figure 7.14) is only available under nView Dualview and Span
"Accessing the
20.
(Figure 7.13) are only available under
Quadro Workstation User's Guide