Apply Color Changes To; Color Channels - Nvidia Quadro Workstation User Manual

Chapter 7
Configuring Key ForceWare Graphics Driver Features

Apply Color Changes to...

The Apply color changes to list appears at the top of the Color Correction page.
Click the list to display the settings below and then select a setting.
• All applies the color correction settings on this page to your Windows desktop
and to video playback.
• Desktop applies the color correction settings to your Windows desktop.
• Overlay/VMR applies color correction settings on this page to video playback that
uses overlay hardware.
Note: Current generation hardware overlay does not support per-component
• Full Screen Video applies color correction settings on this page to any full screen
video that is running on your display.

Color Channels

The color channels list appears directly above the color curve graph on the Color
Correction page.
Click the color channel list to select a color channel.
You can adjust the Red, Green, and Blue channels by selecting each color separately
or by selecting the composite choice All channels, which is the default setting.
Note: If you select the Overlay/VMR setting from the Apply color changes to list
(see
When you select a color channel, notice that the following takes place:
• The color appears in the graph of the color correction curve below.
• Moving the Brightness/Contrast/Gamma sliders changes the appearance of the
colored line/curves in the graph in real time.
For additional information on the graph of the color correction curve, see
Curve Graph
98
(Red, Green, Blue) color correction, but instead exposes a single. unified
color correction channel. Therefore, if you select this setting, only the All
Channels setting in the color channels list is available. (See
in the next section.)
Apply Color Changes
below.
to...), only the All Channels setting is available.
Quadro Workstation User's Guide
Color Channels
Color