Troubleshooting; Guidelines For Using Cisco Aironet Lightweight Access Points; Using Dhcp Option 43 - Cisco Aironet 1600 Getting Started Manual

Aironet 1600 series access point
Hide thumbs Also See for Aironet 1600:
Table of Contents

Advertisement

10

Troubleshooting

If you experience difficulty getting your access point installed and running, look for a solution to your
problem in this guide or in additional access point documentation. These, and other documents, are
available on Cisco.com.

Guidelines for Using Cisco Aironet Lightweight Access Points

Keep these guidelines in mind when you use 1600 series lightweight access points:
• The access point can only communicate with Cisco wireless LAN controllers, such as 2500 series,
5500 series, and WiSM controllers.
• The access point does not support Wireless Domain Services (WDS) and cannot communicate with
WDS devices. However, the controller provides functionality equivalent to WDS when the access
point joins it.
• CAPWAP does not support Layer 2. The access point must get an IP address and discover the
controller using Layer 3, DHCP, DNS, or IP subnet broadcast.
• The access point console port is enabled for monitoring and debug purposes. All configuration
commands are disabled when the access point is connected to a controller.

Using DHCP Option 43

You can use DHCP Option 43 to provide a list of controller IP addresses to the access points, enabling
them to find and join a controller. For configuration information, see the following document:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080871
4fe.shtml
The Vendor Class Identifier (VCI) string for the 1600 series access point is Cisco AP c1600.
Note
Checking the Access Point LED
The location of the access point status LED is shown in
Regarding LED status colors, it is expected that there will be small variations in color intensity
Note
and hue from unit to unit. This is within the normal range of the LED manufacturer's
specifications and is not a defect.
16
Figure
5.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents