Internal Antennas; Regulatory Domains; Countries Supported; Access Point Ports And Connectors - Cisco Aironet 1600 Getting Started Manual

AIR-ANT2544V4M-R
AIR-ANT2566P4W-R

Internal Antennas

The 1602I model access points are configured with up to three dual-band inverted-F antennas and two
2.4-GHz/5-GHz dual-band radios.
Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single feed line. The basic features
are as follows:
• Dual-band inverted-F antenna for use in both the 2.4-GHz and 5-GHz bands.
• Antenna unit integrated into 1602I model access points.
• Peak gain is approximately 4 dBi in the 2.4-GHz band and approximately 4 dBi in the 5-GHz
band.

Regulatory Domains

The 1600 series supports the following regulatory domains (shown as "x" in the model numbers):
• -A, -C, -E, -I, -K, -N, -Q, -R, -S, -T, -Z

Countries Supported

Click this URL to browse to a list of countries and regulatory domains supported by the 1600:
www.cisco.com/go/aironet/compliance
6

Access Point Ports and Connectors

The 1602E model access points have external antenna connectors and the LED indictor on the top of
the model, as shown in
have external connectors on the top of the unit; however, they do have the LED indicator on top of
the unit, as shown in
6
Dual-resonant omni (4-port)
Dual-resonant Directional antenna
(4-port)
Figure 1. The 1602I model access points have integrated antennas and do not
Figure 2.
4/4
6/6